You can also configure the XT Server from the endpoint itself by first connecting a monitor (see
Connecting a Monitor to the XT Server on page 25), and enabling advanced configuration, as described
in Maintaining the XT Server Locally from the Endpoint on page 45.
By default, all computers in the network can manage and upgrade the XT Server remotely. To limit
access to specific computers in the network, see Enabling Remote Management on the Scopia XT
Server for IP Office on page 35.
For details on managing your XT Server from the web interface, see:
Navigation
•
Retrieving the IP Address of the XT Server on page 29
•
Accessing XT Server Web Interface on page 34
•
Enabling Remote Management on the Scopia XT Server for IP Office on page 35
•
Configuring Remote Upgrade Settings on page 37
Retrieving the IP Address of the XT Server
You can manage the XT Server from its web interface. To access the web interface and configure
settings, you must first retrieve the IP address, in one of the following ways:
Navigation
•
Retrieving the XT Server IP Address via Bonjour on page 29
•
Retrieving the XT Server IP Address via SNMP Discovery on page 30
•
Retrieving the XT Server IP Address via Serial Port Query on page 31
Tip:
We recommend using the Bonjour discovery method, since it is the simplest.
To configure the XT Server without retrieving the IP address, connect a monitor and manage the
system from the endpoint's own interface, as described in Managing your XT Server Locally from the
Endpoint on page 39.
Retrieving the XT Server IP Address via Bonjour
About this task
This procedure describes how to retrieve the XT Server's IP address using Bonjour, a protocol that
enables automatic discovery of devices on the local network. After retrieving the IP address, you can
configure the XT Server from its web interface.
Your network policies may prevent Bonjour discovery of devices that are located on a different subnet
than your computer. In this case, retrieve the IP address using one of the other methods available:
•
Retrieving the XT Server IP Address via SNMP Discovery on page 30
•
Retrieving the XT Server IP Address via Serial Port Query on page 31
To configure the XT Server without retrieving the IP address, connect a monitor and manage the system
from the endpoint's own interface, as described in Managing your XT Server Locally from the Endpoint
on page 39.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 29
To Next Page
Loading...
