Setting the Administrator PIN Code for the XT Server
About this task
This is only relevant if you connected a monitor to your system, as described in Connecting a Monitor to
the XT Server on page 25.
You can modify the administrator PIN code required to access and modify advanced settings, such as
defining camera or network settings. You can do this procedure from the endpoint itself or from the XT
Server web interface.
The default PIN is 1234. We recommend that you change the administrator PIN when starting the
system configuration to prevent users from changing settings by mistake.
You can also set a user PIN code to access basic settings, such as the language displayed on the
interface, as described in Administrator Guide for Scopia XT Server for IP Office. To modify the web
username and password for the XT Server, see Administrator Guide for Scopia XT Server for IP Office.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Server Locally from the Endpoint on page 45.
To modify the PIN, you must be connected via HTTPS (see Enabling Remote Management on the
Scopia XT Server for IP Office on page 35).
Procedure
1. Access the PIN settings, as follows:
•
From the endpoint's main menu, select Configure > Advanced > Utilities > PIN
Protect Settings > Advanced Settings > Choose a new PIN Code.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
•
From the XT Server web interface, select Administrator Settings > Utilities > PIN
Protect Settings > Administrator.
Figure 40: Modifying the administrator PIN
2. Enter the current PIN code required to access the Advanced settings in the Old PIN Code
field. The default PIN is 1234.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 71
To Next Page
Loading...
