This procedure removes the current certificate by replacing it with a blank form. To back up a certificate
before deleting it from the system, see Backing Up and Restoring XT Server Certificates on page 93.
Procedure
1. Access the XT Server web interface, as described in Accessing XT Server Web Interface on
page 34.
2. Select Administrator Settings > Utilities > Certificates.
3. Leave all fields blank and select Create to start a new CSR procedure. This erases the
previous certificates.
Figure 58: Removing Current Certificates
Enabling the TLS Connection in XT Server
About this task
This procedure describes how to enable the system to use the TLS connection, which is required to
secure communications between other video network devices and your XT Server.
Before you begin
Upload the required certificates to the XT Server, as described in
Uploading XT Server Certificates on
page 91.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Securing your Scopia XT Server for IP Office | 95
To Next Page
Loading...
