Before you begin
•
Obtain a license key for the Scopia XT Server for IP Office as described in Registering the Scopia
XT Server for IP Office to Obtain a License Key on page 48 or, if you are enabling a license option
to extend Scopia XT Server for IP Office functionality, see Installing and Enabling Licenses which
Extend System Functionality on page 48.
•
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Server Locally from the Endpoint on page 45.
Procedure
1. Access the Scopia XT Server for IP Office's Main menu.
2. Select Configure > Advanced > Utilities > Licenses.
The Licenses screen appears, displaying the serial number (10-digit string) and user code.
The user code corresponds to the system MAC address. These fields are not editable.
Figure 26: Activating a license
Important:
The serial number is also printed on a label affixed at the back of the XT Codec Unit.
3. Enter the license key you received when registering the product. You can also enter license
keys for optional features.
4. Select Activate Licenses.
The license is automatically enabled.
Performing Basic Configuration
Before you perform basic configuration for the XT Server, your system administrator should install and
activate your XT Server (for details, see the Quick Setup Guide for Scopia XT Server for IP Office, the
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 52
To Next Page
Loading...
