Tip:
Verify that the system's time is synchronized with SNTP, otherwise you may need to wait a
few hours before using this certificate (for details, see Setting Date and Time on page 72).
You can start using this certificate at the time indicated by the notBefore value in the
signed certificate.
Figure 55: Signed certificate from the CA
5. Continue with Enabling the TLS Connection in XT Server on page 95.
Backing Up and Restoring XT Server Certificates
About this task
This section explains how to backup and restore certificates using a USB key to store the certificate
information. You can only perform this procedure from the endpoint's interface. If you want to delete the
certificates without first backing them up, proceed as explained in
Deleting XT Server Certificates on
page 94.
Procedure
1. Connect a USB key to the upper USB port of the XT Codec Unit (Figure 56: Connecting a
USB Key to the XT Codec Unit on page 94).
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Securing your Scopia XT Server for IP Office | 93
To Next Page
Loading...
