Before you begin
1. Ensure that you have the root certificate for the certificate authority that your organization uses. The
root certificate must be compatible with the Base-64 ASCII code, in either .pem or .cer format.
2. Ensure that you have the signed certificate from the CA for the XT Server (see Generating a
Certificate Signing Request for XT Server on page 89 for details on generating the CSR).
Procedure
1. Access the XT Server web interface, as described in
Accessing XT Server Web Interface on
page 34.
2. Select Administrator Settings > Utilities > Certificates.
3. Import the Certificate Authority (CA) root certificate as follows:
Figure 53: Uploading the CA root certificate
a. Select Choose File (next to Step 3) and browse to the CA root certificate you received
from the CA.
b. Select Upload.
4. Import the signed certificate you received from the CA, as follows:
Figure 54: Uploading the signed certificate
a. Select Choose File (next to Step 4) and browse to the signed certificate you received
from the CA.
b. Select Upload.
The certificate is validated and its details appear (Figure 55: Signed certificate from the CA
on page 93).
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Securing your Scopia XT Server for IP Office | 92
To Next Page
Loading...
