Important:
The code and icon do not appear when the default code, 01, is used.
6. Set the code and exit by doing one of the following:
•
In the web interface, select Finish.
•
In the endpoint, press OK.
Maintaining the XT Server Locally from the Endpoint
About this task
To perform advanced configuration and maintain the Scopia XT Server for IP Office from the endpoint
itself, you must first perform this procedure to access advanced settings. For example, you can upgrade
the XT Server. For more information about maintaining the XT Server, see Administrator Guide for
Scopia XT Server for IP Office.
To use the XT Remote Control Unit to manage the system, you must first connect a monitor, as
described in
Connecting a Monitor to the XT Server on page 25. Otherwise, you can manage the system
from the web interface only (see Managing your XT Server from the Web Interface on page 28).
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is 1234.
Procedure
1. From the endpoint's main menu, select Configure > General.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 45
To Next Page
Loading...
