Chapter 6 | Initial Configuration
After connecting the system and powering it on as described in Setting up the Scopia XT Server for IP Office on page
24, perform the initial configuration as described in these sections:
Navigation
•
How to Control the XT Server on page 28
•
Registering and Enabling your Scopia XT Server for IP Office license on page 47
•
Performing Basic Configuration on page 52
•
Registering the XT Server to IP Office on page 61
•
Configuring Call Settings on page 63
•
Setting Basic System Information on page 66
•
Configuring Network Settings on page 76
How to Control the XT Server
You can set up and control your XT Server, as well as make calls, in the following ways:
•
From the endpoint's main menu, using your XT Remote Control Unit (see Using the XT Remote
Control Unit on page 40 and Accessing the Main Menu of the XT Server on page 39).
To use the XT Remote Control Unit to manage the system, you must first connect a monitor, as
described in Connecting a Monitor to the XT Server on page 25. Otherwise, you can manage the
system from the web interface only (see Managing your XT Server from the Web Interface on page
28).
•
From the XT Server's web interface (see Accessing XT Server Web Interface on page 34).
Before performing initial configuration, we recommend reading the following topics to familiarize yourself
with how to control the XT Server:
Navigation
•
Managing your XT Server from the Web Interface on page 28
•
Managing your XT Server Locally from the Endpoint on page 39
Managing your XT Server from the Web Interface
You can configure and control the XT Server remotely using the web interface:
•
Perform administrative tasks, such as:
–
Monitoring the status
–
Backing up the endpoint's configuration files
•
Change basic settings, such as the interface language (for details, see Performing Basic
Configuration on page 52)
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 28
To Next Page
Loading...
