Figure 15: Retrieving the XT Server IP address via serial port query
5. Open a web browser and enter the IP address.
The web interface opens. You can log in as described in Accessing XT Server Web Interface
on page 34.
Important:
The initial IP assigned to the XT Server is a dynamic IP address. When you first start
configuring the system, we recommend assigning a static IP address by performing the
procedure described in Configuring IP Addresses on page 77.
Accessing XT Server Web Interface
About this task
This procedure describes how to access the XT Server web interface. The XT Server supports the
following internet browsers:
•
Internet Explorer version 8 or later
•
Google Chrome version 11 or later
•
Mozilla Firefox version 3.6 or later
•
Apple Safari version 5 or later
•
Opera version 11 or later
Before you begin
Retrieve the system's IP address, as described in Retrieving the IP Address of the XT Server on page
29.
Procedure
1. Open any of the supported internet browsers and enter the system's IP address.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 34
To Next Page
Loading...
