Table 11: Scopia XT Server for IP Office Software Options
Feature Option/Reference Description
Video resolution 55111-00937 Full HD
(1080p)
Higher quality video at 1080p 60 fps instead
the default 720p 60fps.
Recording
Videoconferences
55111-00933 USB
Recording License
You can record videoconferences and store
them to a connected USB storage device.
You cannot record videoconferences when
encryption is enabled. For more information,
see Enabling Encryption for Videoconferences
on page 97 or contact your administrator.
When recording a videoconference, you can
include up to 5 remote endpoints.
Scopia Control 55111-00917 Scopia Control Enables controlling the Scopia XT Server for
IP Office using the Scopia Control Application
(iPad).
This procedure details how to register your extended license purchase, to convert your new user code
and option key into an updated license key.
Procedure
1. Open the envelope that you obtained when you bought your license extension, or refer to the
email you received after purchasing the license.
2. Locate the option key in the letter. Locate the serial number on the XT Codec Unit or the user
code you received with the purchase.
You can also retrieve the user code and serial number by selecting Configure > About from
the Main menu.
3. From your computer's Internet browser, navigate to http://licensing.radvision.com/.
4. Complete the online registration form and enter the serial number or the user code and the
option key. The Web registration form returns a license key.
5. Write down the license key and keep it in a safe place for future use.
6. Use the license key to enable the software or the option you bought, as described in:
•
Remotely Enabling the License from the Web Interface on page 49
•
Enabling the License from the Scopia XT Server for IP Office on page 51
Remotely Enabling the License from the Web Interface
About this task
This procedure describes how to enable the software license of an XT Codec Unit remotely via the web
interface. You can also enable the license from the endpoint's interface, as described in
Enabling the
License from the Scopia XT Server for IP Office on page 51.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 49
To Next Page
Loading...
