Figure 14: Establishing a serial connection
Table 8: Establishing a serial connection
Field Value
Port Enter the serial port number on your computer to which
you connected the cable, for example COM1. If you are
unsure of which serial port, consult your computer's
documentation.
Baud rate Set to 115200.
Data bits Set to 8.
Parity Set to None.
Stop bits Set to 1.
The PC connects to the XT Server.
4. In the console:
a. Type cd lan.
b. Type read IP.
The IP address is displayed.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 33
To Next Page
Loading...
