Figure 34: Configuring the Priority setting from the web interface
2. Set the Priority setting to the GLAN port that the preferred network uses. This field specifies
in which order the system places outgoing calls.
3. From the web interface only, select Save.
4. Access the call settings as follows:
•
From the web interface, select Administrator Settings > Calls > Preferences >
General.
•
From the endpoint, select Configure > Advanced > Calls > Preferences > General.
Figure 35: Configuring general call settings
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Initial Configuration | 64
To Next Page
Loading...
