3-24 Packet Reference Manual
C9. alignment Alignment of constant text in the field. L is the default. Options:
L Align on left side of field (default)
C Center text within field (monospaced fonts only)
R Align on right side of field (monospaced fonts only)
B Align at midpoint of field
E Align at endpoint of the field
Use L, B, or E for any font.
The red dot indicates the field origin and the line indicates the
column position for each field in the following graphic.
C10. char rot Character rotation. 0 is the default. The field or supply does not
rotate, only the characters do. Options:
0 Top of character points to top of field
1 Top of character points to left of field
2 Top of character points to bottom of field
3 Top of character points to right of field
C11. field rot Field rotation. 0 is the default. Field rotation rotates the whole
field, not just the characters. Rotation is affected by the pivot
point, which varies depending on how text is justified. Lower left
corner of field is the pivot point. Options:
0 Top of field points to top of supply
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply
To Next Page
Loading...
