Defining Fields 3-25
C12. “fixed char” Fixed characters to appear in the field. Maximum 2710
characters. “” is the default. Enclose in quotation marks.
C13. sym set Symbol set. Use 0 for the Internal Symbol Set. 0 is the default.
For scalable or TrueType® fonts, use:
1 ANSI Symbol Set
100 Macintosh
101 Wingdings
102 Unicode (user input) for particular mapping
103 BIG5 (user input) for Unicode mapping
104 GB2312 (user input) for Unicode mapping
105 SJIS (user input) for Unicode mapping (CP 932, Japanese)
106 GB2312 (user input) for GB2312 mapping (CP 936,
Simplified Chinese)
107 BIG5 (user input) for BIG5 mapping (CP 950, Traditional
Chinese)
108 KSC (user input) for KSC mapping (CP 5601 Korean)
110 Unicode UTF-8
437 DOS Code Page 437 (Domestic)
850 DOS Code Page 850 (International)
852 DOS Code Page 852 (Latin 2)
855 DOS Code Page 855 (Russian)
857 DOS Code Page 857 (IBM Turkish)
860 DOS Code Page 860 (MS-DOS Portuguese)
1250 Code Page 1250 (Latin 2)
1251 Code Page 1251 (Cyrillic)
1252 Code Page 1252 (Latin 1)
1253 Code Page 1253 (Greek)
1254 Code Page 1254 (Turkish)
1255 Code Page 1255 (Hebrew)
1256 Code Page 1256 (Arabic)
1257 Code Page 1257 (Baltic)
1258 Code Page 1258 (Vietnam)
Note: The Standard, Reduced, Bold, OCRA and HR fonts only support
the Internal Symbol Set (0). The CG Triumvirate™ typefaces only
support the ANSI (1) and DOS Code Page 437 (2) and 850 (3)
Symbol Sets. The scalable font (font#50) does not support Code
Page 1256 Arabic (10). Code pages 852-860 and
1250-1258 are for downloaded TrueType fonts or the scalable
font. Code pages 102-110 require a downloaded International
TrueType font. TrueType fonts are designed to be regionally
specific; therefore, all code pages may not be supported in a
given font. See Appendix C, “Symbol Sets/ Code Pages
” for more
information.
If using symbol set 110 (Unicode UTF-8), set the MPCL control
characters (start of header, etc.) to decimal values between 0
and 128; otherwise, errors may occur with the Unicode data
entered. See Chapter 2, "Configuring the Printer
" for more
information about the MPCL control characters.
Example C,30,10,0,1,1,1,B,L,0,0,"MADE IN USA",0 |
Defines a constant text field starting at row 30, column 10. It does not have any additional inter-
character gap. The Standard font is used without any additional magnification. The printing is
black on white and left justified. No field or character rotation is used. “MADE IN USA” is printed
in this field. The internal symbol set is used.
To Next Page
Loading...
