Avigilon VMA-AS3X-IPMI - Page 11

7. Replace the lid back onto the unit and secure it in place with the two M2 screws.
8. By default, the IPMIWeb interface IPaddress is set to 192.168.1.2.
l
If you want to set the IPMI to DHCP, see Configuring DHCP on the next page.
l
If you want to continue using the default IPaddress, see Accessing the IPMIWeb Interface the
First Time on page13
9. Remove the two M2 Phillips screws that are securing the cover for the IPMImodule Ethernet port to
connect the Ethernet cable.
Installing the IPMI Module 11