Maintenance Options
The Maintenance group of pages allows you to perform maintenance tasks on the device. See the following
sections for more detailed information.
Backup Configuration
This page allows you to set up the specific configurations to be backed up.
1. Navigate to Maintenance > Backup Configuration to set up the backup. You can select which
configurations to back up from the following options:
l
Check All: Selects all of the configurations.
l
KVM: Select to backup the KVM configuration settings.
l
Network & Services: Select to backup the network and services settings. Selecting to backup
Network & Services will also automatically select to backup IPMI.
l
IPMI: Select to backup the IPMI module settings.
l
NTP: Select to backup the NTP settings.
l
Authentication: Select to backup the user and authentication settings.
l
SYSLOG: Select to backup the SYSLOG settings.
2. Click Download to save the backup file to the client system.
3. When prompted, click OK to perform the backup.
Dual Firmware Update
The Dual Firmware Update wizard takes you through the steps of the dual image based firmware upgrade.
1. Navigate to Maintenance > Dual Firmware Update.
2. Select the image that you want to update in the Image to be Updated drop-down list. Options are:
Inactive Image, Image 1, Image 2, or Both Images.
3. (Optional) Select the Reboot the device after update checkbox to have the device automatically
reboot when the update is completed.
4. Click Preserve all Configuration to preserve your configuration settings during the update. In
necessary, click Edit Preserve Configuration to modify which settings will be preserved.
5. Click Browse to find and select the dual firmware image you want to update to. The update process
will go through the following steps:
Maintenance Options 45
To Next Page
Loading...
Need help?
General
