Hex Character
11 DC1 (device control 1)
12 DC2 (device control 2)
13 DC3 (device control 3)
14 DC4 (device control 4)
15 NAK (negative ack.)
16 SYN (synchronous idle)
17 ETB (end of trans. blk)
18 CAN (cancel)
19 EM (end of medium)
1A SUB (substitute)
1B ESC (escape)
1C FS (file separator)
1D GS (group separator)
1E RS (record separator)
1F US (unit separator)
20 SPACE
7F DEL
Modifying an Existing User
1. Click on an active user tab on the User Management page to open the User's screen.
2. Click Delete if you want to delete the user.
3. Enter the name of the user in the User Name field.
The user name is a case sensitive string of 1 to 16 alpha-numeric characters. It must start with an
alphabetic character. Special characters -_@ are supported.
4. Select the Change Password checkbox if you want to modify the password or password settings.
5. Select the size of the new password with the Password Size drop-down menu. For a 20 byte
password, the LAN session will not be established.
6. Enter your new password in the Password and Confirm Password fields.
Modifying an Existing User 39
To Next Page
Loading...
