EasyManuals Logo

Avigilon VMA-AS3X-IPMI User Manual

Avigilon VMA-AS3X-IPMI
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
1. Navigate to Settings > Network Settings > Network IPSettings.
2. Configure the network settings as either LAN or VLAN:
l
LAN:
a. Check the Enable LAN checkbox.
b. Select the LAN Interface to be configured from the drop-down list.
c. Check the Enable IPv4 checkbox to enable IPv4 settings on the LAN interface.
o
To have the IPv4 network settings dynamically configured using DHCP, check the
Enable IPv4 DHCP checkbox.
o
If you don't use IPv4 DHCP, manually enter the IPv4 Address, IPv4 Subnet Mask,
and IPv4 Default Gateway in their respective fields.
d. Check the Enable IPv6 checkbox to enable IPv6 settings on the LAN interface.
o
To have the IPv6 network settings dynamically configured using DHCP, check the
Enable IPv6 DHCP checkbox.
o
If you don't use IPv6 DHCP, manually enter the IPv6 Address, Subnet Prefix
Length, and IPv6 Index in their respective fields.
e. Click Save to save the settings.
l
VLAN:
a. Check the Enable VLAN checkbox.
b. Enter the VLANID. This value ranges from 2 to 4094 and is used to identify the VLAN
configuration.
c. Enter the VLAN Priority. This value ranges from 0 to 7, with 7 being the highest priority.
d. Click Save to save the settings.
Network Link Configuration
This page is used to configure the network links for the available network interfaces.
1. Navigate to Settings > Network Settings > Network Link Configuration.
2. Select the LAN Interface to be configured from the drop-down list.
3. Select to enable or disable Auto Negotiation. When enabled, this option allows the IPMI module to
perform automatic configuration of speed and duplex to achieve the best possible link.
If Auto Negotiation is disabled, you will need to manually enter the Link Speed and Duplex Mode
settings. Duplex mode can be either Half Duplex or Full Duplex. The Link Speed can be either 10 or
100. 1000 Mbps link speed only applies when Auto Negotiation is enabled.
4. Click Save to save the settings.
DNS Configuration
The Domain Name System (DNS) is a distributed hierarchical naming system for computers, services, or any
resource connected to the Internet or a private network. It associates assigned domain names to each device
or service using DNS so that they will have a more meaningful name for users to recognize instead of their
numerical identifiers. Use the DNS Configuration page to manage the DNS settings of your device.
Network Link Configuration 23

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avigilon VMA-AS3X-IPMI and is the answer not in the manual?

Avigilon VMA-AS3X-IPMI Specifications

General IconGeneral
BrandAvigilon
ModelVMA-AS3X-IPMI
CategoryNetwork Hardware
LanguageEnglish

Related product manuals