Avision AD280 - Online and Offline Diagnostics

4-2
4.1.2 Offline diagnostics
To run the offline diagnostics, and turn the power back on. When you first turn the
scanner back on, the LED light will blink, indicating that the diagnostics are in
progress. Observe the front panel LED closely. In a short time, the LED indicates the
results of the offline diagnostics as explained in the table below.
Double-colored LED –
Green Light
LCD
Error indication
OFF
“Error code 2013
ADF paper jam”
Group 2 error (Paper Jam Error )
OFF
“Error code 2014
ADF cover open”
Group 3 error (Cover Open Error )
Table 4.2 Offline diagnostics results
To return the scanner to online operation, turn off the scanner and turn the scanner
back on.