9-12
Chapter 9. LIST OF COMMUNICATION DATA
Bank
Item name
RAM address EEPROM address RAM EEPROM
Decimal
point
information
Notes
Decimal
Hexadecimal
Decimal
Hexadecimal
Read Write Read Write
Status
Instrument alarm status
9202 23F2 25586 63F2 X X —
Bits 0 to 1: Undefined.
Bit 2:
AL70
(A/D)
Bit 3:
AL95
(Set data)
Bit 4:
AL96
(Adjustment data)
Bit 5:
AL97
(Set data/RAM)
Bit 6:
AL98
(Adjustment data/
RAM)
Bit 7:
AL99
(ROM)
Bits 8 to 15 Undefined.
Internal Event/Internal Contact
function
9203 23F3 25587 63F3 X X —
Bit 0 to 7: Internal event 1 to 8
Bit 8 to 12: Internal contact
1 to 5
Bit 13 to 15: Undefined.
Control status
9204 23F4 25588 63F4 X X —
Bit 0: MANUAL mode
Bit 1: READY mode
Bit 2: RSP mode
Bit 3: During AT
Bit 4: During ST
(Invalid in this unit)
Bit 5: During SOAK of step
operation
Bit 6: During SP ramp
Bit 7: During SP ramp-up
Bit 8: During SP ramp-down
Bits 9 to 10: Undefined.
Bit 11: During estimate of
MFB
Bit 12: During adjustment
of MFB
Bit 13: PID (Heat) is being
used.
Bit 14: PID (Cool) is being
used.
Bit 15: Undefined.
DO status
9205 23F5 25589 63F5 X X —
Same as RAM address 14337
(decimal).
Bit 0: Control output 1
Bit 1: Control output 2
Bit 2: Event output 1
Bit 3: Event output 2
Bit 4: Event output 3
Bits 5 to 15: Undefined.
DI status
9206 23F6 25590 63F6 X X —
Same as RAM address 14338
(decimal).
Bit 0: DI1
Bit 1: DI2
Bit 2: DI3
Bit 3: DI4
Bits 4 to 15: Undefined.
Communication DI (DI1 to 4)
9207 23F7 25591 63F7 —
Bit 0: Communication DI1
Bit 1: Communication DI2
Bit 2: Communication DI3
Bit 3: Communication DI4
Communication DI1
9208 23F8 25592 63F8 —
Communication DI2
9209 23F9 25593 63F9 —
Communication DI3
9210 23FA 25594 63FA —
Communication DI4
9211 23FB 25595 63FB —
Tag
Tag 1
9301 2455 25685 6455 —
Display and setting cannot be
made with the console.
Tag 2
9302 2456 25686 6456 —
Same as above.
Tag 3
9303 2457 25687 6457 —
Same as above.
(Continue on next page.)
To Next Page
Loading...
