1-1
Chapter 1. OVERVIEW
1 - 1 Overview
This unit is a compact controller having a mask of 48 × 96 mm or 96 × 96 mm and provides the following features:
• The depth is only 65 mm, providing excellent space-saving.
• The front panel is only 5 mm thick. This ensures excellent thin design.
• The display panel is large. This provides excellent visibility.
• [mode] key, [para] key, digit-shift keys, [display] key, and [enter] key are
provided on the front panel. This ensures easy setup operation.
• Various input types are available, thermocouples (K, J, E, T, R, S, B, N, PLII,
WRe5-26, Ni-NiMo, PR40-20, DIN U, DIN L, gold iron chromel), RTDs (Pt100,
JPt100), current signals (4 to 20 mAdc, 0 to 20 mAdc), and voltage signals (0 to
10 mV DC, -10 to +10 mV DC, 0 to 1 V DC, 1 to 5 V DC, 0 to 5 V DC, and 0 to
10 V DC).
• The accuracy is ±0.1 %FS and the sampling cycle time is 0.1 s. This ensures high
accuracy.
• For control output types, relay, voltage pulse for driving SSR, current output, and
continuous voltage outputs are provided. Additionally, these control output types
can be combined for control outputs 1 and 2.
• Three event output points or two event output points (independent contacts) are
provided as standard functions.
• 2-point CT input, 4-point digital input, RSP input, and RS-485 can be combined
as optional functions.
• Current output or continuous voltage output is provided as auxiliary output.
• The unit can be configured for the heat/cool control using the 2nd control output
and/or event relay.
• The unit can be controlled by means of the ON/OFF control or fixed PID control
method.
• In addition to the PID control, two algorithms, RationaLOOP and Just-FiTTER,
are built-in, which ensures excellent controllability.
• The personal computer loader port is provided as standard function. The setup
can be configured easily with use of the personal computer loader.
• Use of optional the SLP-C35 Smart Loader Package makes it possible to easily
perform the read/write operation of the parameters.
In addition to the table format setup, the operation and control status can be
monitored using the trend display. This unit can be operated without use of
program on the host unit.
• The unit conforms to the IEC directive and the CE marking is affixed on the unit.
(Standards compliance: EN61010-1 and EN61326-1)
To Next Page
Loading...
Need help?
General
