Introduction Azbil Corporation
1-4 MagneW FLEX+/PLUS+ Electromagnetic Flowmeter Detector
1.3 : Main components
Detector
There are three types of model MGG/MGS Electromagnetic Flowmeter Detectors:
Wafer detectors, Flange detector, and Union / Hose / Clamp detector. The type of
detector you choose depends on your specic installation requirements. All types of
detectors function such that when a conductive uid passes through the detectors, an
electromotive force signal proportional to the ow rate is generated.
WARNING
To prevent the gas or liquid in the pipe from escaping, do not remove the
electrode cover or the electrodes when the detector is installed on a pipe.