Azbil MagneW FLEX+ User Manual

MagneW FLEX+/PLUS+ Electromagnetic Flowmeter Detector 2-1
Chapter 2 : Installation
This section describes unpacking, installation and wiring of the MagneW FLEX+/
PLUS+
.
Depending on the grounding ring or piping material, the required parts or the method
of device installation vary.
2.1 : Unpacking
This device is a precision instrument and should be handled with care to prevent
damage or breakage.
WARNING
This detector is heavy. Dropping it could cause personal injury or damage to the
device.
After unpacking the unit, verify that the following items are present:
• MagneW
FLEX+/PLUS+ Detector
• Standard accessories
• Precautions for installation sheet
2.1.1: Verifying specications
The specications for this device are written on its attached identication plate.
Compare these specications with those listed in Appendix A, device standard
specications and model numbers, and verify that all specications on the plate are
correct, paying special attention to the following:
• Detector size
• Electrode material
• Lining material
• Flange rating
• Grounding ring material
If you have questions regarding the specications of your device, contact your nearest
Azbil Corporation oce or the azbil Group representative. When making an inquiry,
be sure to provide the model number and product number of this device.

Azbil MagneW FLEX+ Specifications

General

Brand	Azbil
Model	MagneW FLEX+
Category	Measuring Instruments
Language	English