Measurements
Velocity Unit
[Region]
U
Use Velocity Unit to set the velocity to meters/sec or feet/sec.
To set Velocity Unit, follow these steps from the Measurements menu:
1. Select Velocity Unit.
2. Position the arrow to select meters/sec or feet/sec.
3. Press [E] to save the setting and return to the Measurements menu.
Flow Units
[Region]
U
Use Flow Units to set the unit of measure for the flow rate and Full Scale Flow. Changing the flow units
parameter readjusts the Full Scale Flow parameter. For example, changing from gpm to gps would
change the Full Scale Flow from 60 gpm to 1 gps.
To change the Flow Unit, follow these steps from the Measurements menu:
1. Select Flow Units to view the Flow Units display.
2. Position the arrow next to one of the following flow unit options:
Code Flow Unit Code Flow Unit
LPS Liters/Second GPM Gallons/Minute
LPM Liters/Minute GPH Gallons/Hour
LPH Liters/Hour MGD Mega Gallons/Day
M
3
S Cubic Meters/Second IGS UKG/Second
M
3
M Cubic Meters/Minute IGM UKG/Minute
M
3
H Cubic Meters/Hour IGH UKG/Hour
F
3
S Cubic Feet/Second MID Mega UKG/Day
F
3
M Cubic Feet/Minute LbM Pounds/Minute
F
3
H Cubic Feet/Hour OPM Ounces/Minute
GPS Gallons/Second BPM Barrels/Minute
3. Press [E] to save the flow units and return to the Measurements menu.
Totalizer Unit
[Region]
U
Use the Totalizer Unit to establish the units of measure for the totalizers.
To change the Totalizer Unit value, follow these steps from the Measurements menu:
1. Select Totalizer Unit to view the Totalizer Unit display.
2. Position the arrow next to one of the following totalizer units:
Code Totalizer Unit Code Totalizer Unit
L Liters MIG Mega Imperial Gallons
HL Hectoliters Lb Pounds
M
3
Cubic Meters Oz Fluid Ounces
CFt Cubic Feet Aft Acre Feet
USG U.S. Gallons BBL Barrels
MG Mega Gallons SFD Second Foot Day
UKG Imperial Gallons
3. Press [E] to save the totalizer unit and return to the Measurements menu.
Using the Main Menu Programming Options
Page 38 March 2022MAG-UM-01272-EN-21
To Next Page
Loading...
