www.baldormotion.com
General Information 1-5MN1919
CAUTION: Electrical components can be damaged by static electricity. Use ESD
(electrostatic discharge) procedures when handling this drive.
CAUTION: Ensure that encoder wires are properly connected. Incorrect installation may
result in improper movement.
CAUTION: The threaded holes in the top and bottom of the case are for cable clamps. The
holes are 11.5 mm deep and accept M4 screws, which must be screwed in to a
depth of at least 8mm.
CAUTION: Removing the cover will invalidate UL certification.
CAUTION: The metal heatsink on the left side of the MicroFlex can become very hot during
normal operation.
To Next Page
Loading...
Need help?
General
