Baldor MicroFlex Installation Manual

www.baldormotion.com
C-2 CE & UL MN1919
C.1.3 Declaration of conformity
EC Declaration o f Conformity
Date: 01/02/05 Ref: DE00014-001
Manufacturer: Baldor UK Limited
Address
: Mint Motion Centre, Hawkley Drive, Bristol Distribution Centre, Bris tol, BS32 0BF, United Kingdom
Hereby dec lare that the product:
MicroFlex Single-Axis Servo and Positioning Drive, being one of:
FMH2A01TR-xNy3 FMH2A03TR-xNy3 FMH2A06TR-xNy3 FMH2A09TR-xNy3
(where x =RorE, y = 4 or 2)
when used in accordance with the guidance given in the corresponding MicroFlex Installation Manual, MN1919, conforms
with t he protection requirements of the following Council Directives, by application of the relevant harmonized standards:
The Elect romagnetic Compatibility Directive 89/336/EEC
and its amending directives:
Standard
:
EN61800-3:1996 + A11:2000
Title:
Adjustable speed electrical power drive
systems Part 3: EMC Product standard,
including test methods.
Comments:
Emissions & Immunity comply
with both 1st & 2nd environments.
The Low Voltage Directive 72/23/EEC
and its amending directives:
Standard:
EN61800-5-1:2003
Title:
Adjustable speed electrical power drive systems. Safety requirements. Electrical,
thermal and energy.
EN61800-2:1998 Adjustable speed electrical power drive systems. General requirements. Rating
specifications for low voltage adjustable frequency a.c. power drive systems.
EN50178:1998 Electronic equipment for use in power installations.
EN60529:1992 Specification for degrees of protection provided by enclosures (IP code).
EC Declaration o f Incorporation
The Machinery Directive 98/37/EC and its amending directives:
The above product is intended to be incorporated into mac hinery or to be assembled with other machinery to constitute
machinery covered by directive 98/37/EC. As such does therefore not in every respect comply with the provisions of
directive 98/37/EC.
User must follow the guidance given in this directive to meet all necessary protection requirements. All instructions,
warnings & safety information of the product manual MN1919 must be adhered to. User must follow the guidance given in
harmonized s tandard EN60204-1 (Safety of Machinery) to meet necessary protection requirements of this directive.
and furthermore declare that it may not be put into service before the machinery in which it will be incorporated is declared
to comply with the provisions of directive 98/37/EC, as amended.
Signed:
Dr. Gerry Boast
Engineering Manager

Baldor MicroFlex Specifications

General

Brand	Baldor
Model	MicroFlex
Category	Amplifier
Language	English