iv Contents
MN1919
B Control System B-1.....................................
B.1 Introduction B-1............................................
B.1.1 Current (Torque) control B-2.........................................
B.1.2 Velocity (Speed) control B-3.........................................
B.1.3 Position (Step and Direction) control B-4...............................
C CE&UL C-1...........................................
C.1 Outline C-1................................................
C.1.1 EMC Conformity and CE marking C-1.................................
C.1.2 MicroFlex compliance C-1...........................................
C.1.3 Declaration of conformity C-2........................................
C.1.4 Use of CE compliant components C-3.................................
C.1.5 EMC wiring technique C-3...........................................
C.1.6 EMC installation suggestions C-4.....................................
C.1.7 Wiring of shielded (screened) cables C-5..............................
C.2 UL file numbers C-6.........................................
To Next Page
Loading...
