Baltech VP-3470 - Page 40

40 Programs and functions
BALTECH VP-3470
Operation manual
PROGRAM FUNCTION BRIEF DESCRIPTION
SENSORS
Channel 1
Allows selecting the parameters of the
vibration sensor for the channel 1.
Channel 2
Allows selecting the parameters of the
vibration sensor for the channel 2.
Add
Allows adding the vibration sensor to the
database.
Edit
Служит для изменения параметров датчика
вибрации в базе данных.
Delete
Allows deleting the parameters of the
vibration sensor from the database.
GENERAL SETTINGS
Set date/
time
Allows setting the date and time.
Standby
mode
Allows setting the standby mode.
Backlight Allows adjusting the display backlight.
Language
Allows selecting a language:
1. Russian
2. English
Connect to
PC
Connect to PC
About device
Allows viewing the device information:
software version, serial number, free memory.
It also allows performing self- testing of the
device.
The menu navigation is performed using the navigation buttons qput, Enter/
Cancel (Figure 4). The selected function is displayed with capital letters. To confirm
the selection press Enter. The program has a step-by-step menu that guides the
user throughout the whole procedure, step by step.