Main Menu > Imager > Focus
3.3.6 Strobe
The Internal Strobe configures the operation of the integrated ring light. The External Strobe configures the operation of an external light.
Main Menu > Imager > Strobe
External
The External Strobe is a 5V output that can be used for an external light. Setting options are Always ON, Always OFF, or Exposure
Based. If Exposure Based is selected, then the external light is on during the time the sensor is capturing an image.
Main Menu > Imager > Strobe > External
iVu Series Image Sensor
28 www.bannerengineering.com - tel: 763-544-3164 Rev. E
To Next Page
Loading...
