To verify each product, an iVu Series sensor is configured for a Match inspection. An image of a good product package is captured.
When the inspection is running, if the sensor detects a package with a different or missing label, the sensor sends a fail output to the line,
and the product is rejected.
2.1.2 Blister Pack Inspection
Because of tightened federal regulations that make the quality of pharmaceutical packaging increasingly critical, when tablets are inser-
ted into a blister pack, manufacturers need to verify that all the blisters in a pack have been filled with unbroken tablets.
To verify each blister in the pack, use an iVu Series sensor configured for an Area inspection. The sensor inspects each blister pack to
make sure that each blister contains an unbroken tablet.
2.1.3 Vial Stopper Inspection
iVu Series Image Sensor
Rev. E www.bannerengineering.com - tel: 763-544-3164 7
To Next Page
Loading...
Need help?
General
