Modify FOV
Use this option to reduce the size of the FOV.
Main Menu > Imager > FOV > Modify FOV
3.4 Inspection Menu
The Inspection menu icon is located on the the Main Menu, and provides access to parameters that need to be set for an inspection.
Main Menu > Inspection
3.4.1 Match
When the sensor is configured as a Match sensor, set the ROI Type, Percent Match, Rotation Range, and Pass Count for the inspection.
Main Menu > Inspection > Match
iVu Series Image Sensor
30 www.bannerengineering.com - tel: 763-544-3164 Rev. E
To Next Page
Loading...
