6. Connecting
Image 6-4
LAN connection
2. Connect the other side to a LAN.
6.4 Power connection and switching on
WARNING: Use a power cord which complies to local regulations. If not included in the box, contact your
local dealer for a correct power cord.
How to connect
1. Plug the power cable in the mains power connector at the back of the Base Unit
Note: The local v ariant of the power cable is included in the ClickShare box.
Image 6-5
Power connection
European version
Type C and type G
Japanese version Type A
Chinese version Type I CCC
North American version Type A
2. To power on the unit, set the rocker switch to “1”.
32
R5900006 CLICKSHARE 04/12/2013
To Next Page
Loading...
