Barco ClickShare - Maintenance, Buttons Information

8. Web Interface
Image 8-26
Detail associated devices
System Management
Use the Re start System button to restart ClickShare.
Use the Shutdown System button to shutdown ClickShare.
Image 8-27
System management
8.17 Maintenance, Buttons information
About buttons
The Buttons tab gives information on the Buttons that have been paired to the Base Unit.
The following information is given:
• Connected or not
• Serial number
• Last connected
• Status
How to get the information
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Buttons (2).
The content of the Buttons tab is displayed.
R5900006 CLICKSHARE 04/12/2013
71