8. Web Interface
Image 8-28
Paired buttons, overview
The list gives an overview of the Buttons that have in the past been paired to this Base Unit. If a Button has in the meantime
been paired to another Base Unit, it will still appear in this list. To remove it from the list, at the right of the tab page, click More
and select Remove from list.
In the overview of paired Button
s, for each Button that has been paired to this Base Unit, you will find:
The following items can be seen in the list:
- Connected: indicates whether the button is connected or not at the moment.
- Serial number: the unique serial number of the button.
- Last connected: the date the Button was last connected to the Base Unit
-Statusthefirm- and software status of the button.
Status indication
Icon Explanation
OK Button firmware and software are up to date. The Button has been paired to the Base Unit.
ERROR The Button needs to be paired to the Base Unit again before using it. The Button firmware
version is incompatible with the Base Unit firmware version.
3. To get more information on the Button firmware, the number of connections and the MAC address, click More....
72
R5900006 CLICKSHARE 04/12/2013
To Next Page
Loading...
Need help?
General
