Barco ClickShare Service Guide

8. Web Interface
8.21 Downloads from Base Unit
About downloads
The launcher service and the ClickShare client software for PC or MAC are stored on the Base Unit and can be downloaded for
installation on the user’s PC.
For more information, see "Pre-install of the Launcher service", page 50.
How to download
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Software (2).
Image 8-34
Downloads software
The content of the Software tab is displayed.
3. To download the Launcher Service, for Windows, click on Download Windows Launcher or for Mac, click on Download Mac
Launcher.
4. To download the ClickShare Client, for Windows, click on Download Windows Client or for Mac, click on Download Mac Client.
8.22 Manage System Configuration
About Manage system configuration
A full backup can be downloaded but cannot be used to duplicate configuration settings to other Base units. Therefore, it is possible
to download a Portable version. This portable version can be uploaded via the upload confi guration button on other Base units. Via
the same button, the full backup can be uploaded on the original Base Unit.
A portable backup contains:
• Wallpapers
• Wallpapers settings
• Logging settings
• Link name
• Link setting auto show/hide
• All display settings
• OSD language
• Location
• Welcome message
• Audio functionality enabled/disabled
• WiFi channel
• WiFi frequency
R5900006 CLICKSHARE 04/12/2013
77

Barco ClickShare Specifications

General

Plug-and-Play	Yes
Video Outputs	HDMI
Supported Resolutions	Up to 4K UHD
Number of Concurrent Users	Up to 8 (depending on the specific model)
Operating System Compatibility	Windows, macOS
Security Protocols	WPA2
Maximum Resolution	3840x2160
Connection	USB
Encryption	AES
Supported Video Formats	H.264
Wireless Technology	Wi-Fi