8. Web Interface
ClickShare position
As the base unit supports dual display, an output can be associated with the primary display or with the secondary display. Auto-
matically the second input is associated with the free display.
To change the position, click on the drop down box next to ClickShare P osition and select the position. The corresponding display
is associated with the output port.
8.9 On-screen text format
About on-screen text
The language of the on-screen messages and ClickShare Instructions wallpaper can be changed. Also the color, size and style of
the messages can be updated. The background color and the transparency can be adapted so that they match with the text layout.
How to start
1. Log in to the ClickShare web interface.
2. Click the Se tup tab (1) and then the Display tab (2).
The content of the Display tab is shown. The last pane shows the O n-screen Text Form at
Image 8-13
On-screen text
3. When changes are made, click Apply to activate the new settings.
To cancel the changes, click Refresh Page.
Language selection
1. Select the language of the on-screen text and ClickShare Instructions wallpaper. Click on the drop down box next to Language
and select the desired language.
Image 8-14
Language selection
62 R5900006 CLICKSHARE 04/12/2013
To Next Page
Loading...
Need help?
General
