Barco ClickShare Service Guide

8. Web Interface
Image 8-18
Audio settings
How to change
1. Log in to the ClickShare web interface.
2. Click the Setup tab and then the Audio tab.
3. To enable audio on the Base Unit, check the check box next to E nable Audio Functionality.
Changing the audio setting, requires a re-pairing of the Buttons.
8.11 Advanced settings: H ostname
Hostname
Hostnames are human-readable nicknames that correspond to the address of a device connected to a network.
How to change
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
Image 8-19
Hostname
3. Click in the input field next to Hostnam e (3)
R5900006 CLICKSHARE 04/12/2013
65

Barco ClickShare Specifications

General

Plug-and-Play	Yes
Video Outputs	HDMI
Supported Resolutions	Up to 4K UHD
Number of Concurrent Users	Up to 8 (depending on the specific model)
Operating System Compatibility	Windows, macOS
Security Protocols	WPA2
Maximum Resolution	3840x2160
Connection	USB
Encryption	AES
Supported Video Formats	H.264
Wireless Technology	Wi-Fi