8. Web Interface
The content of the Logging tab is displayed.
Image 8-39
Logging
3. To create a debug log, check the check box next to Debug Logging (3).
4. Reproduce the issue you want to report.
5. To download the current log file, click on Download Log (4).
6. To clear the current log file, click C lear Log (5).
7. • To enable logging by the ClickShare client (6):
- If the launcher service is running hold down the shift key while connecting the dongle to the PC, until logging is started.
- If the launcher service is not running : hold down the shift key while double clicking the ClickShare application.
The following message appears on the sys tray:
Image 8-40
Client logging
8. Click Apply.
8.26 ClickShare Help, Barco contact data
About ClickShare Help
All kind of manuals, firmware and software updates can be found on Barco’s website. For technical assistance contact your reseller.
How to consult
1. Log in to the ClickShare web interface.
2. Click the Help tab (1) and then click Contact (2).
R5900006 CLICKSHARE 04/12/2013
81
To Next Page
Loading...
Need help?
General
