6. Connecting
In this example, we will connect to the wireless network of the Base Unit. If you want to use a different network, please contact
your IT administrator.
- Go into the Apple TV main menu and connect to the ClickShare Base Unit WiFi (IP address = 192.168.2.1, password :
clickshare,SSID:ClickSharre-”serial number unit”)
Image 6-17
- Continue without internet. Set IP via DHCP.
Image 6-18
- GototheSettings page, select General, S
leep after and set to Never;
Image 6-19
Image 6-20
- GototheSettings page, select Screen Saver, Start After and set to Never.
Image 6-21
36 R5900006 CLICKSHARE 04/12/2013
To Next Page
Loading...
