Barco ClickShare Service Guide

8. Web Interface
Image 8-4
Setup, basic settings
The Basic tab is displayed by default.
3. In the Identification section click in an input field and enter
- the name of the meeting room
- the location of the meeting room
- a welcome message which will be displayed below the meeting room name and location.
Note: The name of the meeting roo m is used by the Client software to identify the Base Unit it is connected to.
4. Click Apply to confirm your changes.
R5900006 CLICKSHARE 04/12/2013
55

Barco ClickShare Specifications

General

Plug-and-Play	Yes
Video Outputs	HDMI
Supported Resolutions	Up to 4K UHD
Number of Concurrent Users	Up to 8 (depending on the specific model)
Operating System Compatibility	Windows, macOS
Security Protocols	WPA2
Maximum Resolution	3840x2160
Connection	USB
Encryption	AES
Supported Video Formats	H.264
Wireless Technology	Wi-Fi