8. Web Interface
The following settings are the defaults:
• Meeting room identification info is cleared.
• Language is set to English.
• Custom wallpapers are removed and the default wallpaper is restored.
• Display resolution is set to auto and standby timer is reset to infinity
• Display Identifiers are turned off.
• Hostname and SSID is set to clickshare-serialnumber.
• The SSID is broadcasted
• WiFi password is reset to c lickshare.
• The default WiFi channel is set back to frequency 2.4 GHz, channel 6.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin.
• Debug logging and remote logging are disabled.
How to restore factory defaults
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Configuratio n (2)..
Image 8-36
Factory defaults
3. Click on Load Default Settings to return to the factory defaults (3).
Alternative way to load default settings
1. With the Base unit switched off, connect a USB keyboard to a USB port at the back side the Base unit.
2. Power up the Base Unit.
Image 8-37
Alternative way
R5900006 CLICKSHARE 04/12/2013 79
To Next Page
Loading...
Need help?
General
