Barco ClickShare - Page 99

9. Software updating
As an emergency recovery procedure you can use the software update stick. However, in that case the software will be fully erased
and the Base Unit will be reformatted.
To update the Base Unit software via the web interface
1. Download the latest version of the software from Barco’s website, www.barco.com/clickshare. Click on Visit the ClickShare
product page andgototabDownloads.
Image 9-4
ClickShare product page
Image 9-5
Download page
2. Login to the ClickShare web interface.
3. Click the Maintenance tab (1) and then click Software (2).
Image 9-6
Update software
The content of the Software tab is displayed.
The current version of the Base
Unit software is shown.
4. Click Up load N ew Software... . (3).
A browser window opens.
R5900006 CLICKSHARE 04/12/2013
87