3. Lenses
3. LENSES
About
Overview
• Approved Lenses
• Lens ran ge
• Replace a lens
• Lens s hift
• Adjust zoom and focus
• Adjust Iris
3.1 Approved Lenses
Approved Lenses
Partnumber Description For North Am rica
Outside North america
R9801214
FLD 1.6 - 2.32 : 1 (EN11)
approved approved
R9801218
FLD0.74: 1(EN12)
approved approved
R9801228
FLD 1.24 - 1.6 : 1 ( EN13)
approved approved
R9801209
FLD 2.37 - 3.79 : 1 (EN14) approved – professional use
only
approved – professional use
only
R9801225
FLD1:16: 1(EN15)
approved approved
R9801249
FLD 3.8 - 6.5 : 1 (EN16) approved – professional use
only
approved – professional use
only
R9801216
FLD+ 1.7 - 2.5 : 1 (EN41)
approved approved
R9801226
FLD+ 0.8 : 1 (EN42)
approved approved
R9801230
FLD+ 1.2 - 1.7 : 1 (EN43)
approved approved
R9801211
FLD+ 2.5 - 4.6 : 1 (EN 44) approved – professional use
only
approved – professional use
only
R9801220 FLD+ Long Focus 0.8 - 1.21 :
1 (EN45)
approved approved
R9801221
FLD+ Short Focus 0.8 - 1.21 :
1 (EN46)
approved approved
R9801295
FLD+ 0.65 : 1 (EN47)
approved approved
PN_EN58
FLD+ 0.28 : 1 (EN58)
approved approved
This projector may becom e Risk Group 3 (RG 3) when an interchangeable lens with throw ratio greater than 4.7 is installed. F or
Northern Ame rica, installation requirements according to Risk group 3 (RG3) must be followed w hen interchangeable lens with throw
ratio greater than 2.5 is installed.
Refer to the manual cha pter 1.7 for the throw ratio versus hazard distance before operation.
3.2 Lens range
CAUTION: Alw ays remove the lens from t he lens holder before mo ving or t ransporting the projector. Failure
to do this may cause damage to the lens holder and prism.
Available lenses — WUXGA
The FLD lens range is custom-engineered for W UXG A and 1080 projectors.
The electrical connection to the lens m otors is via a spring probe contact (pogo) pin array on the bayonet m ount.
The pr ojector will automatically detect and identify the lens when it is installed. Automatic detection is not av ailable for 3rd party
lenses.
601–426 F70 SERIES 24/10/2017
25