4. Physical Installation
4. PHYSICAL INSTALLATION
About
This chapter describes the physical c onditions and procedures required w hen installing the F70 pro jector. It also describes the
outlines and some of the co nsiderations that should be taken in to account w hen designing and setting up the installation.
Each projector installation is unique, and as such the information in t his chap ter is only p rovided as a guideline. Likewise, any images
or g raphical representations shown here are for illustrative purposes only.
If you re quire further information and assistance during the installation process, contact a qualified projection technician or your local
support office for advice.
Overview
• Installation Process
• Installation conditions
• Initial inspection
• Positioning the projector
• Mounting the projector, general considerations
• Projector safe attachment points
• Throw distance
• Scheimpflug (Boresight) adjustment
• Scheimpflug adjustment procedure
4.1 Installation P ro ce ss
Recommended Installation sequence
Item Procedure Read more in chapter
1
Confirm that the installation area meets all
technical and environmental requirements
See "Installation conditions", page 31
2 Decide where the projector will be mounted
See "Positioning the projector", page 33
3
Unpack the projector and confirm that all
equipment is present and in good working order
See "Initial inspection", page 32
4 Mount the projector See "M ounting the projector, general considerations",
page 33
5
Install the projector lens See "Replace a lens", page 27
6 Connect the source See "Projector source and control connections", page
41
7
Power up the projector
See "Power u p the projector", page 44
8
Set up the image See "Image menu", page 53
4.2 Installation c onditions
Environmental Conditions
Barco projectors are m anu factured according to s pecific design standards, w hich also include en vironmental
conditions. Failing to follow the terms a
nd conditions outlined in this chapter can result in loss of product
warranty
The table b elow summarize the physical en
vironments in wh ich the projector may be safely operated or stored.
Environmen t Amb ient operating
temperature
Relative Humidity
Storage condition
0 -500m +10 to +45 °C 10 –80% RH –20 to +60 °C, 10 – 9 0 % RH
500 -1500m +10 to +40 °C 10 –80% RH –20 to +60 °C, 10 – 9 0 % RH
601–426 F70 SERIES 24/10/2017 31
To Next Page
Loading...
Need help?
General
