1. Safety
1. SAFETY
About this chapter
Read this chapter thoroughly before attempting to install or ope rate the projector.
To prevent per sonal injury to us ers or physical dam age to the projector while ins talling and using your p rojector, ensure that yo u
understand and follow all safety guidelines, instructions and warnings inc luded in this chapter a nd this manual.
Clarification of the te rm F70 / F90 se ries used in this document
Use in this document of the term, F70 / F 90 series, means that the content is applicable for the followi
ng products:
• F90–W13WUXG A
• F90–4K13 4KUHD/WQXG A
•F70—4K6
•F70—W6
Defining the GP6 platform
The F90 series products in general, are all products within the Barco GP6 Platform.
Defining the GP7 platform
The F70 series products in general, ar e all products within the Ba rco GP7 Platform
Overview
• General considerations
• Important safety instructions
• Projector Hazard Distances
• High B rightness P recautions
• Hazard Distance for fully closed projection system
• HD in function of the lens Throw Ratio (TR)
• Safety sym bols
• Contact adresses
• Product Info
• Statement
1.1 General considerations
Notice on optical radiation F90 Series
• The projector is Class 1 laser product that conforms with IEC EN 60825-1:2014. For Northern America, the projector is class
3R laser product up to throw ratio 2.33. The projector conforms with IEC 60825–1:2007, and with performance standards for
laser products under 21 C FR 1040, except with respect to those c haracteristics authorized by Variance Num ber 2016–V-0144
effective M arch 6, 2017
Do no t s tare into Beam .
• This projector is Risk Group 2 (RG2) according to IEC EN 62471-5.
This projector may become Risk Group 3 (RG 3) when an interchangeable lens w ith throw ratio greater th an 3.15 is installed.
For Northern America, installation requirements according to Risk group 3 (RG 3) m ust be followed when interchangeable lens
with throw ratio greater than 2.33 is installed.
Refer to the m anual for the lens list and throw ra tio before operation.
Such com bination of projector and lens are intended for professional use only, and are not intended for consumer use.
• For RG3, no direct exposure to the beam shall be permitted.
For RG3, operators shall control a ccess to the beam within t
he hazard distance or install the product at a height that will prevent
eye exposure within the haz ard distance.
• This projector has tw o (2) built-in Class 4 lase r clusters. Disassembly or modification is very dangerous and should never be
attempted.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk o f hazardous laser radiation expo-
sure.
• Do n ot o pen or disassemble the pr ojector as this may cause damage b y the exposure of laser r adiation.
601–426 F70 SERIES 24/10/2017
3
To Next Page
Loading...
Need help?
General
