Standard Features AW00097603000
172 Basler aviator GigE
A target value for an image property can only be reached if it is in accord with all
pertinent camera settings and with the general circumstances used for capturing
images. Otherwise, the target value will only be approached.
For example, with a short exposure time, insufficient illumination, and a low setting
for the upper limit of the gain parameter value, the Gain Auto function may not be
able to achieve the current target average gray value setting for the image.
You can use an auto function when binning is enabled (monochrome cameras
only). An auto function uses the binned pixel data and controls the image property
of the binned image.
To Next Page
Loading...
Need help?
General
