Standard Features AW00097603000
192 Basler aviator GigE
10.10 Sequencer
The sequencer feature allows to apply specific sets of configuration parameter settings, called
sequence sets, to a sequence of image acquisitions. As the images are acquired, one sequence
set after the other is applied. This makes it possible to respond to different imaging requirements
and conditions, that may, for example, result from changing illumination, while a sequence of
images is acquired.
Three sequence advance modes (auto, controlled and free selection sequence advance modes)
provide different schemes for advancing from one sequence set to the next (see below for details).
The sequencer feature will not work if the auto functions feature is enabled.
For more information about the auto functions feature, see Section 10.7 on
page 171.
If the sequencer feature is not available, activate the "Full" camera description file.
For more information, see Section 10.20 on page 260.
To Next Page
Loading...
