AW00097603000 Camera Functional Description
Basler aviator GigE 23
4 Camera Functional
Description
This chapter provides an overview of the camera’s functionality from a system perspective. The
overview will aid your understanding when you read the more detailed information included in the
later chapters of the user’s manual.
4.1 Overview
Each camera provides features such as a full frame shutter and electronic exposure time control.
Exposure start and exposure time can be controlled by parameters transmitted to the camera via
the Basler pylon API and the GigE interface. There are also parameters available to set the camera
for single frame acquisition or continuous frame acquisition.
Exposure start can also be controlled via an externally generated "frame start trigger" (ExFSTrig)
signal applied to one of the camera’s input lines. The ExFSTrig signal facilitates periodic or non-
periodic acquisition start. Modes are available that allow the length of exposure time to be directly
controlled by the ExFSTrig signal or to be set for a pre-programmed period of time.
Accumulated charges are read out of the sensor when exposure ends. The sensor can be read out
in a four tap fashion or in a one tap fashion.
To Next Page
Loading...
Need help?
General
