AW00097603000 Physical Interface
Basler aviator GigE 33
5.3 Camera Connector Types
5.3.1 12-Pin Connector
The 12-pin connector on the camera is a Hirose micro receptacle (part number HR10A-10R-12P)
or the equivalent.
The recommended mating connector is the Hirose micro plug (part number HR10A-10P-12S) or the
equivalent.
5.3.2 8-Pin RJ-45 Jack
The 8-pin jack for the camera’s Ethernet connection is a standard RJ-45 connector.
The recommended mating connector is any standard 8-pin RJ-45 plug. Cables terminated with
screw-lock connectors are available from Basler. Contact your Basler sales representative to order
cable assemblies.
Suitable cable assemblies are also available from, for example, Components Express Inc. and from
the Intercon 1 division of Nortech Systems, Inc.
To ensure that you order cables with the correct connectors, note the horizontal orientation of the
screws before ordering.
To Next Page
Loading...
Need help?
General
