AW00097603000 Standard Features
Basler aviator GigE 199
Assuming that the camera is in the process of continuously capturing images, the sequencer
feature operates as follows:
When the sequencer feature becomes enabled, the sequence set cycle starts: The parameter
values of the sequence set with sequence set index number 0 are loaded into the active set
modifying the active set.
When a frame start trigger is received, sequence set 0 is used for the image acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 1 for
sequence set 0, this sequence set is only used once and therefore the camera advances to the
next sequence set: The parameter values of sequence set 1 are loaded into the active set and
are used for the image acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 3 for
sequence set 1, this sequence set is used a second time: The parameter values of sequence
set 1 are used for the image acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter was set to 3
for sequence set 1, this sequence set is used a third time: The parameter values of sequence
set 1 are used for the image acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 3 for
sequence set 1, this sequence set can not, after three uses, be used again in the current
sequence set cycle. Therefore, the camera advances to the next sequence set: The parameter
values of sequence set 2 are used for the image acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 1 for
sequence set 2, this sequence set is only used once and therefore the camera advances to the
next sequence set: The parameter values of sequence set 3 are used for the image
acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 1 for
sequence set 3, this sequence set is only used once and therefore the camera advances to the
next sequence set: The parameter values of sequence set 4 are used for the image
acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 1 for
sequence set 4, this sequence set is only used once and therefore the camera advances to the
next sequence set: The parameter values of sequence set 5 are used for the image
acquisition.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 2 for
sequence set 5, this sequence set is used a second time: The parameter values of sequence
set 5 are used for the image acquisition.
The camera has cycled once through the complete sequence set cycle.
When the next frame start trigger is received, the camera checks the current Sequence Set
Executions parameter value. Because the Sequence Set Executions parameter is set to 2 for
sequence set 5, this sequence set can not, after two uses, be used again in the current
To Next Page
Loading...
